Please use this identifier to cite or link to this item: http://archives.univ-biskra.dz/handle/123456789/2413
Full metadata record
DC FieldValueLanguage
dc.contributor.authorF. Chabane-
dc.contributor.authorN. Moummi-
dc.contributor.authorB. Said-
dc.date.accessioned2014-04-23T11:38:28Z-
dc.date.available2014-04-23T11:38:28Z-
dc.date.issued2014-04-23-
dc.identifier.urihttp://archives.univ-biskra.dz/handle/123456789/2413-
dc.description.abstractThis paper presents a thermal performance of a single pass solar air heater with fins attached was investigated experimentally. Longitudinal fins were used inferior the absorber plate for an increase the heat exchange and uniform the flow fluid in the channel. The effects of mass flow rate of air on the outlet temperature, the heat transfer in a thickness of solar collector and thermal efficiency were studied. Experiments were performed for two air mass flow rates of 0.012 kg/s., Moreover; the maximum efficiency was obtained by using five longitudinal fins and without fins. The maximum efficiency obtained for the 0.012 kg/s with and without fins were 40.02 % and 34.92 %, respectively. Comparison of the results as an effect the solar collector’s with and without fins shows a substantial enhancement in the thermal efficiency. Link http://papers.itc.pw.edu.pl/index.php/JPT/article/view/369en_US
dc.language.isoenen_US
dc.subjectSolar intensity, Solar air collector, Heat transfer, Design, Temperature.en_US
dc.titleExperimental analysis on thermal performance of a solar air collector with longitudinal fins in a region of Biskra, Algeriaen_US
dc.typeArticleen_US
Appears in Collections:Publications Internationales



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.