Please use this identifier to cite or link to this item: http://archives.univ-biskra.dz/handle/123456789/3619
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSaâd Rahmane-
dc.contributor.authorMohamed Abdou Djouadi-
dc.contributor.authorMohamed Salah Aida-
dc.date.accessioned2013-06-12T19:18:01Z-
dc.date.available2013-06-12T19:18:01Z-
dc.date.issued2013-06-12-
dc.identifier.issn1112 - 3338-
dc.identifier.urihttp://archives.univ-biskra.dz/handle/123456789/3619-
dc.description.abstractThe effect of annealing temperature ranged from 200 to 600 °C on the structural, optical and electrical properties of aluminum doped zinc oxide (ZnO:Al) films was reported. The thin films were deposited on glass and silicon substrates by rf magnetron sputtering method using ZnO target (diameter 7,5 cm) mixed with 2 wt.% Al2O3. It has been found that the crystal structure of ZnO:Al films is hexagonal with c-axis preferential orientation. With an increase in the annealing temperature the intrinsic compressive stress was found to decrease, and near stress-free film was obtained after annealing at 600 °C. A resistivity of 1.25x10-3 cm and an average transmittance above 90 % in visible range were obtained for films prepared at room temperature.en_US
dc.language.isoenen_US
dc.subjectmagnetron sputtering, Al doped ZnO, annealing temperature, properties.en_US
dc.titleTHE EFFECT OF ANNEALING ON THE PROPERTIES OF ZNO:AL FILMS GROWN BY RF MAGNETRON SPUTTERINGen_US
dc.typeArticleen_US
Appears in Collections:CS N 18

Files in This Item:
File Description SizeFormat 
6-Rahmanecourrier savoir.pdf744,04 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.